SPECIFICATIONS Hull : Steel ( Standard) Superstructure : Steel (Standard) Length o.a. : 17.30 meters Beam o.a. : 5.50 meters Draft : 1.50 meters Total tank capacity : 3.8 m³ Power (total) : 1500 hp Speed : 22 knots... read more

This Advertisement is for under-construction vessel to deliver in short time. Conventional twin-screw tug designed to perform ship-assist/ harbour tug duties and construction support. With a significantly low air draft and a shallow navigational draft there are few places inaccessible to these tugs. Particulars of the 1300Series Tugs are as follows: Length O.A.:- 13 metres Beam, moulded, extreme:- 4.8 metres Depth, moulded (hull):- 1.9 metres Maximum Draft:- 2.2 metres Maximum Air Draft: - 4.5 metres Bollard Pull, ahead: 12 tonnes (2X500hp) Free running speed, ahead: 11 knots ... read more

SPECIFICATIONS Hull : Steel ( Standard) Superstructure : Steel (Standard) Length b.p. : 14.95 m Beam b.p.. : 5.80 m Depth at sides : 3.80 m Draft : 1.60 m Max Draft : 2.30 m Total tank capacity : 16 m³ Power range (total) : 1500 hp Speed range : 12 knots Bollard Pull: 17 TBP... read more

This Advertisement is for new build order. Conventional twin-screw tug designed to perform ship-assist/ harbour tug duties and construction support. With a significantly low air draft and a shallow navigational draft there are few places inaccessible to these tugs. The tug was also designed for the maximum speed possible for a tug of this size. Particulars of the 2000Series Tugs are as follows: Length O.A.:- 20 metres Beam, moulded, extreme:- 7.5 metres Depth, moulded (hull):- 3.3 metres Maximum Draft:- 3 metres Maximum Air Draft: - 6 metres Bollard Pull, ahead: 24 tonnes (2... read more

The TS designation is used to describe a family of conventional twin-screw tugs, typically a smaller and simpler ship-assist/ harbour tug or one used for construction support or dredge tending etc THIS ADVERTISEMENT IS FOR NEW BUILD UNIT. ATTACHED PICTURES ARE FROM DELIVERED VESSELS. BUYERS CAN VISIT THE SISTERSHIPS UPON A REQUEST.... read more

NEW BUILD PONTOON 50 x 20 x 3,40 m MAIN DIMENSIONS Length overall = 50.00 metre Beam, moulded = 20.00 metre Depth, moulded = 3.40 metre Number of Legs = 2 pcs -The barge has a flat deck with a recessed area, which can accommodate an crawler crane up to 230T. The barge has been retro fitted with side tanks increasing the deck area and buoyancy. The barge is equipped with 2 x 24m 914 diam spud legs. Buyer will deliver the crawler crane to shipyard. Buyer is responsible for crawler cranes purchase and service. Shipyard is arranging construction of the hull and related pumps for fuel and... read more

Dimensions Length O.A.: 13 metres Beam, moulded, extreme: 4.40 meters Depth, moulded (hull): 1.95 metres Maximum Draft: 1.60 metres Maximum Air Draft:4.5 metres Basic Functions Towing operations Pushing operations Line handling General asistance Fire fighitng Performance Bollard Pull, ahead: 10-12 tonnes Speed, ahead: 8-12 knots Speed, astern: 8 knots Tank Capacities Fuel Oil: :4 m³ Fresh Water: :opt SPECIFICATIONS Hull : Configured as conventional twin-screw tug,This vessel is design for multipurpose operations including ship-assist/ harbour tug dutie, dre... read more

A modern twin screw pilot boat of modern standard design suitable for wide range of marine operations specially for pilot transfer, crew transfer handling and mooring duties in both sheltered and coastal harbor waters. Vessel can work as standby vessel 24hr. Boat will be built with Class approved drawings to Class standards with supervision by BV BUREAU VERITAS classification surveyor and will be delivered classification according to this specification. Vessel construction will be built with class approved steel plates and scantlings. Vessel Notation will be: I+Hull +Mach Pilot Boat, Co... read more