Used Boats: Commercial Vessels: 170 Adverts Displaying: 21-30
This vessel is now completed and ready for delivery within 30 days signing.
The vessel is classed American Bureau of Shipping (ABS) +A1, Oil Carrier/Chemical Carrier, (E) +AMS, +ACCU, ESP, RRDA, VEC-L, CPS, TCM, PMA, UWILD, IHM, ENVIRO, CRC, POT, MLC-ACCOM, PMP, BWT.
The vessel is a single-screw driven by one (1) set of low speed marine diesel engine for ocean going service with machinery and accommodation located aft, having forecastle and four (4) tiers of deck house. Six (6) pairs of double side skin cargo tanks and one (1) pair of slop tanks are arranged. Longitudinal center bulkhead ...
read more
Globalworkboats and C5i Maritime Australia are proud to announce the new hybrid propulsion new builds for the 40mtr Security / Patrol/ Crew Boat.
The vessel will comply to BV Classification. It is a proven Aluminum mono hull design.
The vessel is powered by three engines with a light Parallel - Hybrid propulsion system. Effectively, this is a variant of the variable speed shaft generators where an electrical motor is coupled to the main propulsion diesel and can feed energy in two directions, controlled by three fixed pitch propellers.
The bridge and forward passenger seating may be b...
read more
Looking for a small and extremely tough boat that is both practical, safe and reliable, the 18 Workboat is for you. The 3mm thick aluminium hull with double bottom foam filled construction makes this boat virtually unsinkable even when completely flooded.
The open cockpit designs has several variations to cater to different needs and uses. It also has a self draining cockpit that will drain water naturally and quickly. No electrical bilge pumps are required which makes the boat easy to maintain.
Hull Length 18ft (5.39m)
Beam 6ft 0ins (1.82m)
Weight Approx 350 kg
Recommended Powe...
read more
The Rescue 20 is Built solidly with marine alloy hull and fitted with Specially formulated light weight High Impact, Bullet-Puncture Resistant PU foam fendering system.Our fenders are closed cell and coated with double braided Polyurethane skin to ensure that it is strong and yet light.
The boat is approved according to SOLAS Chapter lll, Reg 7,1.2 & Reg 8,2.1 LSA Code 5.1.1.3.1,4.4.2.2.2,4.4.2.3 & 4.4.3.5
Suitable to be used as a Patrol Craft,Fast Rescue Craft,Workboat.
A. Standard Configuration:
1) Multiple Chambers construction, Unsinkable 13” D Fender.
...
read more
A versatile vessel that can meet the requirement for a diverse range of roles. The vessel is not classed.
Standard Configuration:
1) Multiple Chambers construction
2) Marine Grade Aluminium Alloy Construction
3) Multiple Transverse & Longitudinal Frame Reinforcement structures under deck
4) Reinforced keel and chines
5) Aluminium alloy deck full welded with non-slip surface
6) Self Draining cockpit deck with twin drainage hole and scuppers on port and starboard side.
7) Non-slip walk-around walkway
8) Four Nos alloy rope cleats welded to gunwhale
9) Heavy duty wide sec...
read more
3300DWT Grab Barge
Built in 2016, this 80mtr self propelled Grab Barge is now available ex China. Class is ZC with potential operational capacity to move 1500t per hour of sand. coal, ironore etc.
Powered by twin Guangxi Yuchai YC6CL960L-C20, 1000hp engines. Crane engine Guangxi Yuchai 970kW.
LOA 80m x 21m.
The crane is 40t lifting capacity with a 20m3 Grab Bucket. Lifting speed 60m/min, luffing speed 50m/min. Crane range is 35mtrs and cenrally located.
Capacity 3300t cargo hold.
Compliment for 10 crew.
A sought after vessel that has great various work capacities. The clas...
read more
Built in 2010 under CCS Class, this double/ double 834DWT tanker is available for prompt delivery.
LOA 50.98m x 9.6m with laden draft of 3.5m.
Powered by G6190ZLC-1, 450kW, ShanDong JiNan engine
Heating Boiler is LSK1.5-0.7, 1500.00kg/h.
There are 10 holds.
Operational Area is A1 and A2 (CCS Domestic) Coastal Areas.
Next SS due July 2025.
Inspection is available in China by appointment....
read more
A proven dry all round work boat. With a very large bow flare and depth resulting in a very dry and smooth ride, very good tracking in following seas and smooth head sea comfort. The twin semi tunnels allows for better performance and economy. The vessel was built to both commercial work application and dual Passenger 1B class.
Powered by twin Cat 660hp engines, cruise speed is at 19 knots with a sprint of 25 knots.
This vessel is fully ready for production in kit form flatpack production, to be built at your shipyard of choice (subject to qualification) or we can arrange one of our experien...
read more
Based on our superbly successful WFSV catamaran, this 18.1m Offshore Crew Transfer Work Catamaran is designed for hard continuous work in challenging environments.
Powered by twin Cat C18, (875hp ea), the vessel has a cruise speed of 22 knots with sprint of 28 knots. Media have written about this vessel with excellent reviews.
LOA 18.1m x 5.6m.
Designed also for shallow water duties with draft of .065m
Many proven Catamaran hulls have been designed by us and we now offer this vessel ready to go push button kit form to be built at your shipyard of choice or we can arrange one of our experie...
read more
Designed specifically for a local tourism company, this 17m Sailing Cat is a true performer. With 2 x 90hp OB engines, she has a sprint speed of 16 knots and cruise at 9 knots. Under sail, 14 knots is not an issue.
This configuration is for tourism, classed 1C (23+2) 1D (48+2). Customization may be done for future vessels with options for electric drive.
LOA 17m x 8.5m with draft of 1.15m. Full length keel allows beach landings with no damage to rudders.
The pictured vessel is not for sale, only the full kitset for your shipyard/ builder.
The vessel may be supplied kit form to your prefe...
read more